دکتر لعیا جمالی راد

- دکترا. علوم و صنایع چوب و کاغذ، دانشگاه تهران (گذراندن دوره فرصت مطالعاتی در دانشگاه هامبورگ آلمان، انستیتو vTI.

- کارشناسی ارشد. علوم و صنایع چوب و کاغذ، دانشگاه تهران

- کارشناسی. علوم و صنایع چوب و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی گرگان

- چسبندگی و چسب های طبیعی (چسب لیگنین، چسب تانن و ...)

- کامپوزیت های چوب-پلاستیک

-کامپوزیت های لایه ای (تخته لایه، LVL و ...)

- کامپوزیت های فیبری (MDF و...)

- کامپوزیت تخته خرده چوب

1. Jamalirad, L., Doosthoseini, K., Koch, G., Mirshokraie, S. A. and Welling, J. (2012) Investigation on bonding quality of beech wood (Fagus orientalis L.) veneer during high temperature drying and aging. European journal of wood and wood products. 70 (4): 497-506.

2. Jamalirad, L., Doosthosseini, K., Koch, G., Mirshokraee, S.A. and Hedjazi,S. (2011) Physical and mechanical properties of plywood manufactured from treated red - heart beech ( Fagus orientalis L.) wood veneers. Bioresources, 6: 3973-3986.

3. Jamalirad, L., Aminian, H., and Hedjazi, S. 2017. Exploring the Potential of milkweed stalk in wood-plastic manufacture. Journal of Natural Fibers, Accepted 2017.

4. Hosseini, S.B., Hedjazi, S., Jamalirad, L. and Sukhtesaraee, A. (2014) Effect of nano-SiO2 on physical and mechanical properties of fiber reinforced composites (FRCs). Journal of the Indian Academy of Wood Science, 11: 116-121.

5. Hasanjanzadeh, H., Hedjazi, S. and Jamalirad, L. (2013) Study of the effect of alkaline pre- extraction of hemicelluloses on pulp properties prepared with soda-AQ process from rice straw, Forest and Wood Products, Volume 66, No 4: 493-506.

6. Nasri Nobandegani, M., Jamalirad, L., Faraji, F., Yousefi, H. 2017. Using hybrid of fish glue-phenol formaldehyde in plywood manufacturing. Forest and Wood Products, 69(4): 809-819.

7. Hosseini, S.B., Hedjazi, S. and  Jamalirad, L. (2017) Investigation on physical and mechanical properties of pulp–plastic composites from bagasse,  Wood  Material Science & Engineering, Vol. 12, NO. 5, 279–287

8. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2017) Investigation on mechanical-thermal properties of green composite produced from polylactic acid and bagasse pulp fibers. Forest and Wood Products, Volume 70, No. 2: 333-342.

9. Salari, M., Vaziri, V., Aminian, H., Jamalirad, L. 2017. The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard. Iranian Journal of Wood and paper industries, 7(4): 537-547.

10. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2017) Biodegradation behaviors and color change of composites based on type of bagasse pulp//polylactic acid. Iranian Journal of Wood and Paper Industries, Vol. 8, No. 1:1-12.

11. Biazyat, A., Jamalirad, L., Aminian, H., Hedjazi, S. 2016. The effect of using palm wood flour in the manufacture of polypropylene-based wood-plastic composite. Iranian Journal of Wood and Paper Science Research, 31(1): 30-39.

12. Sukhtesaraie, A., Hedjazi, S., Jamalirad, L., Ahmadi, A. and Hosseini, B. (2016) Investigation on pulp –plastic composite properties produced form bagasse with different pulping processes, Forest and Wood Products, Volume 69, No 1: 133-145.

13. Barzali1, S., Jamalirad, L., Faraji, F. and Hedjazi, S. (2016) Urea-formaldehyde resin reinforced silk cocoon, Iranian Journal of Wood and Paper Science Research Vol. 31 No. 3: 500-509.

14. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2016) Effect of bagasse chemical pulping and coupling agent on the physical mechanical properties of composites based on bagasse pulp//Low density polyethylene. Iranian Journal of Wood and Paper Industries, Vol. 7, No. 3: 349-362.

15. Sukhtesaraie, A., Hedjazi, S., Jamalirad, L., Ahmadi, A. and Hosseini, B. (2016) The study of pulp-polypropylene biocomposites properties produced from non-extracted and hot water pre-extracted Bagasse, Iranian Journal of Wood and Paper Science Research Vol. 31 No. (1): 78-91.

16. Gholizadeh, M., Jamalirad, L., Aminian, H. A. and Hedjazi S. (2015) Investigation on the mechanical properties of polypropylene composite reinforced with tobacco stalke flour, Forest and Wood Products, Volume 68, No 2: 261-272

17. Barzali, S., Jamalirad, L., Faraji, F., Hedjazi, S. 2015. Using cellulose nanofiber as filler and reinforcing agent of urea formaldehyde resin in plywood manufacture. Iranian Journal of Wood and paper industries, 6(2): 227-237.

18. Jamalirad, L., Doosthoseini, K., Mirshokraie, S. A. Koch, G.  2013. Chemical and Anatomical Characterization of Discoloration in Beach (Fagus orientalis L.) Veneer during Kiln Drying and Aging. Journal of Natural environment, Iranian Journal of Natural Resources, 65(4):405-420.

19. Narouie, S., Jamalirad, L., Aminian, H., Hedjazi, S. 2018. The properties of poly lactic acid green composites reinforced by tobacco stalk flour. Forest and Wood Products, accepted.

1. Jamalirad, L., K. Doosthoseini, S.A. Mirshokraie, 2010.  The Efficiency of Metal ions Catalyst as Activator in Kraft lignin- Urea Formaldehyde Resin Formulation, 11th  European workshop of lignocellulosic and pulp (EWLP), August 16th-19th in Hamburg, Germany, 591-593.  

2. Jamalirad, L., Doosthoseini, K., Koch, G., Mirshokraie, S. A., 2011. Topochemical detection of phenolic compounds in cell wall layer of beech wood (Fagus orientalis L.) veneer after high drying temperature and accelerating aging. 16th International symposium on wood, fiber and pulping chemistry. China. June 8-10.

3. Hedjazi S., Jamalirad, L., 2015, Monoethanolamine Process: The promising progress in pulping from agriculture lignocellulosic residues, 1st national coneference on wood and lignocellulosic products.

4. Barzali1, S., Jamalirad, L., Faraji, F. and Hedjazi, S., 2015, Urea-formaldehyde resin reinforced silk cocoon, the 1st national coneference on wood and lignocellulosic products.

5. Biazyat, A., Jamalirad, L., Hedjazi, S., Aminian, H., The application of additives in wood-plastic composites. 1st national coneference on wood and lignocellulosic products.

6. Biazyat, A., Jamalirad, L., Hedjazi, S., Aminian, H., 2015, Study of the potentioal of using of palm residues in the manufacture of wood composites. 1st national coneference on wood and lignocellulosic products.

7. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L., 2015, Investigation on comparative mechanical properties of green composite and biocomposite prepared from bagasse fibers. 1st national coneference on wood and lignocellulosic products.

8. Gholizadeh, M., Jamalirad, L., Hedjazi S., Aminian, H. A. 2015, The The influence of nano clay filler content on physical properties of polypropylene composite-tobacco stalke fibers, 1st national coneference on wood and lignocellulosic products.

9. bayrash, M., Jamalirad, L., Aminian, H. A., Hedjazi S., vaziri, V., 2015, The potential of  using agriculture residues (Cultivating and gardening) in particle board manufacture, 1st national coneference on wood and lignocellulosic products.

10. Nasri Nobandegani, M., Jamalirad, L.,  Faraji, F., Yousefi, H. 2015. Investigation on the physical properties of plywood manufactured by fish glue-phenol formaldehyde hybrid. 1st National Conference on Wood and Lignocellulosic Products, May 7 in Golestan, Iran.

11. Nasri Nobandegani, M., Jamalirad, L.,  Faraji, F., Yousefi, H. 2015. Phenol-formaldehyde resin reinforced with lignocelluloses nanofiber. 1st National Conference on Wood and Lignocellulosic Products May 7 in Golestan, Iran.

12. Gholizadeh, M., Jamalirad, L., Aminian, H., Hedjazi, S. 2015. The effect of filler and nano clay on the physical properties of polypropylene-tobacco stalk composites. 1st National Conference on Wood and Lignocellulosic Products, May 7 in Golestan, Iran.

13. Hedjazi S., Jamalirad, L., 2013, Biomass: The strategical option for sustainable development and security of material and energy streams in the future world. The 1st national conference on natural resources management.

14. Gholizadeh, M., Jamalirad, L., Hedjazi S., Aminian, H. A., 2013, The potential of using of tobacco stalk from Golestan province in wood plastic manufacture. The 1st national conference on natural resources management.

15. Gholizadeh, M., Jamalirad, L., Hedjazi S., Aminian, H. A., biaziat, A., ranjbar, J., 2013, Wood- plastic, the new approach for reduction of environmental problems. The 1th national conference on natural resources management.

16. biaziat, A., Jamalirad, L., Hedjazi S., Aminian, H. A., vaziri, V.,  2013, The study and application of ThermoWood new technology. The 1st national conference on natural resources management.

17. biaziat, A., Jamalirad, L., Hedjazi S., Aminian, H. A., 2013, The application of nanotechnology in wood industry. The 1st national conference on natural resources management.

18. Barzali, S., Jamalirad, L., Faraji, F., Hedjazi, S. 2013. Comparison of phenolformaldehyde resin and modified urea formaldehyde resin with tannin. 1st National Conference on Natural Resources Management, February 27 in Golestan, Iran.

19. Barzali, S., Jamalirad, L., Faraji, F., Hedjazi, S., 2013, The reinforcement of UF resin using nanocellulose. The 1st national conference on natural resources management.

20. biaziat, A., Jamalirad, L., Hedjazi S., Aminian, H. A., 2013, The using of lignocellulosic materials in the manufacture of wood plastics the new solution in the field of wood and industry. The 1st national conference on natural resources management.

21. Hasanjanzadeh, H., Yousefi, H., Hedjazi, S., Jamalirad, L., 2012, Super grinding: The easy, fast and high yield method for nanocellulose production. The 1st national conference on nanotechnology and its application in agriculture and natural resources.

1- فیزیک چوب (کارشناسی)

2- روکش و تخته لایه (کارشناسی)

3- تخته فیبر (کارشناسی)

5- اصول چوب بری (کارشناسی)

6- چوب خشک کنی (کارشناسی)

7- چسب و چسبندگی (کارشناسی)

8- تخته خرده چوب (کارشناسی)

9- فرآورده های مهندسی شده (ارشد)

10- فناوری چسب (ارشد)

11- کامپوزیت های خرده ای (ارشد)

12- کامپوزیت های فیبری (ارشد)

13- فناوری های نوین (ارشد)