.Dr. Loya Jamalirad

-Education:

Ph.D.  Wood and paper Science and Technology, University of Tehran, Iran (Short-term research opportunity at the University of Hamburg-Institute (vTI) under supervising of Prof. Dr. Gerald Koch)

M.S. Wood and paper Science and Technology, University of Tehran, Iran

B.S. Wood and paper Science and Technology, Gorgan University of Agricultural Science and Natural Resources, Iran

- Bio-based adhesives (Lignin adhesives, Tannin adhesives…)

- Wood plastic composites

- Laminated composites

- Fiber composites

- Particleboard composites

1. Jamalirad, L., Doosthoseini, K., Koch, G., Mirshokraie, S. A. and Welling, J. (2012) Investigation on bonding quality of beech wood (Fagus orientalis L.) veneer during high temperature drying and aging. European journal of wood and wood products. 70 (4): 497-506.

2. Jamalirad, L., Doosthosseini, K., Koch, G., Mirshokraee, S.A. and Hedjazi,S. (2011) Physical and mechanical properties of plywood manufactured from treated red - heart beech ( Fagus orientalis L.) wood veneers. Bioresources, 6: 3973-3986.

3. Jamalirad, L., Aminian, H., and Hedjazi, S. 2017. Exploring the Potential of milkweed stalk in wood-plastic manufacture. Journal of Natural Fibers, Accepted 2017.

4. Hosseini, S.B., Hedjazi, S., Jamalirad, L. and Sukhtesaraee, A. (2014) Effect of nano-SiO2 on physical and mechanical properties of fiber reinforced composites (FRCs). Journal of the Indian Academy of Wood Science, 11: 116-121.

5. Hasanjanzadeh, H., Hedjazi, S. and Jamalirad, L. (2013) Study of the effect of alkaline pre- extraction of hemicelluloses on pulp properties prepared with soda-AQ process from rice straw, Forest and Wood Products, Volume 66, No 4: 493-506.

6. Nasri Nobandegani, M., Jamalirad, L., Faraji, F., Yousefi, H. 2017. Using hybrid of fish glue-phenol formaldehyde in plywood manufacturing. Forest and Wood Products, 69(4): 809-819.

7. Hosseini, S.B., Hedjazi, S. and  Jamalirad, L. (2017) Investigation on physical and mechanical properties of pulp–plastic composites from bagasse,  Wood  Material Science & Engineering, Vol. 12, NO. 5, 279–287

8. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2017) Investigation on mechanical-thermal properties of green composite produced from polylactic acid and bagasse pulp fibers. Forest and Wood Products, Volume 70, No. 2: 333-342.

9. Salari, M., Vaziri, V., Aminian, H., Jamalirad, L. 2017. The effect of using waste newspaper in surface layers on physical and mechanical properties of three-layer particleboard. Iranian Journal of Wood and paper industries, 7(4): 537-547.

10. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2017) Biodegradation behaviors and color change of composites based on type of bagasse pulp//polylactic acid. Iranian Journal of Wood and Paper Industries, Vol. 8, No. 1:1-12.

11. Biazyat, A., Jamalirad, L., Aminian, H., Hedjazi, S. 2016. The effect of using palm wood flour in the manufacture of polypropylene-based wood-plastic composite. Iranian Journal of Wood and Paper Science Research, 31(1): 30-39.

12. Sukhtesaraie, A., Hedjazi, S., Jamalirad, L., Ahmadi, A. and Hosseini, B. (2016) Investigation on pulp –plastic composite properties produced form bagasse with different pulping processes, Forest and Wood Products, Volume 69, No 1: 133-145.

13. Barzali1, S., Jamalirad, L., Faraji, F. and Hedjazi, S. (2016) Urea-formaldehyde resin reinforced silk cocoon, Iranian Journal of Wood and Paper Science Research Vol. 31 No. 3: 500-509.

14. Allahdady, M., Hedjazi, S., Jonoobi, M., Abdulkhani, A. and Jamirad, L. (2016) Effect of bagasse chemical pulping and coupling agent on the physical mechanical properties of composites based on bagasse pulp//Low density polyethylene. Iranian Journal of Wood and Paper Industries, Vol. 7, No. 3: 349-362.

15. Sukhtesaraie, A., Hedjazi, S., Jamalirad, L., Ahmadi, A. and Hosseini, B. (2016) The study of pulp-polypropylene biocomposites properties produced from non-extracted and hot water pre-extracted Bagasse, Iranian Journal of Wood and Paper Science Research Vol. 31 No. (1): 78-91.

16. Gholizadeh, M., Jamalirad, L., Aminian, H. A. and Hedjazi S. (2015) Investigation on the mechanical properties of polypropylene composite reinforced with tobacco stalke flour, Forest and Wood Products, Volume 68, No 2: 261-272

17. Barzali, S., Jamalirad, L., Faraji, F., Hedjazi, S. 2015. Using cellulose nanofiber as filler and reinforcing agent of urea formaldehyde resin in plywood manufacture. Iranian Journal of Wood and paper industries, 6(2): 227-237.

18. Jamalirad, L., Doosthoseini, K., Mirshokraie, S. A. Koch, G.  2013. Chemical and Anatomical Characterization of Discoloration in Beach (Fagus orientalis L.) Veneer during Kiln Drying and Aging. Journal of Natural environment, Iranian Journal of Natural Resources, 65(4):405-420.

19. Narouie, S., Jamalirad, L., Aminian, H., Hedjazi, S. 2018. The properties of poly lactic acid green composites reinforced by tobacco stalk flour. Forest and Wood Products, accepted.

  - Fiber composites

  - Adhesion and wood adhesives

  - Laminated composites

   - Wood physics